|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ASTM A53 Grade A, B Carbon Steel Seamless and Welded Pipes – Seamless Black Steel Pipes, Hot-Dipped Pipes, Zinc-Coated Pipes, Welded and Seamless Pipes Exporter, Supplier
We are the Approved Suppliers and wanders’ of Adani Power , Kuwait Cement , GIPCL since one Decade.
10,000 sqft, Navi Mumbai, Kalamboli
Ready Stock Available | |
---|---|
ASTM A53 grade A Pipes , Tubes | 100 ton |
ASTM A53 grade B Pipes , Tubes | 100 ton |
ASTM A53 Grade B Seamless Pipes Exporter, and Worldwide Suppliers
This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8 to NPS 26. The steel categorized in this standard must be open-hearth, basic-oxygen or electric-furnace processed and must have the following chemical requirements: carbon, manganese, phosphorus, sulfur, copper, nickel, chromium, molybdenum, and vanadium. The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard. The hydrostatic test shall be applied, without leakage through the weld seam or the pipe body. Nondestructive electric test shall be made to make sure that the full volume of the pipe must be in accordance with the standard. The purchaser shall have the right to perform any of the inspections and tests set forth in this specification where deemed necessary to ensure that the pipe conforms to the specified requirements.
ASTM A53 Grade B carbon steel pipes are widely available and relatively affordable, making it a popular choice for very large projects such as pipelines. Steel Pipes Online stocks and supplies full range of ASTM A53 Grade B pipes and tubes. ASTM/ASME A53/SA53 grade seamless pipes is one of our most widely used grade of carbon steel and is readily available ex-stock for all standard thicknesses up to SCH160. Steel Pipes Online is a reputed distributor of ASTM A53 Grade B pipes Supplier by Suppliers in India such as MSL, ISMT and JINDAL SAW.
ASTM/ASME A53/SA53 carbon steel seamless pipes are used in industrial applications involving high heat, including process piping, boiling plants, compression stations and refineries.
ASTM A53 Grade B Carbon Steel Pipes
End Connections for Line Pipes: Plain, Bevel, Screwed, Threaded
Type: Seamless / ERW / Welded / Fabricated / CDW
Form: Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes
Length: Single Random, Double Random & Required Length, Custom Size – 12 Meter lengths
End: Plain End, Beveled End, Treaded
End Protection: Plastic Caps
Outside Coating: Black Painting, Anti-Corrosion Oil, Galvanised Finish, Finish as per customer Requirements
Inspection, Test Reports: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports, India Boiler Regulations (IBR) Test Certificate
Packing: Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials: Sizes and Specifications other than above can be Supplier on request
High Temperature Seamless Pipe | ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B |
---|---|
Heat Exchanger Seamless Tube | ASTM A179 |
Low Temperature Seamless Pipe | ASTM A333 Gr. 3/6 |
Low Temperature Seamless Tube | ASTM A334 Gr. 6 |
High Yield Seamless Pipe | API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2 |
High Yield Seamless Pipe | ISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485 |
Atmospheric & Low Temp EFW Pipes | ASTM A671 Gr. CC60/CC65/CC70 |
High Pressure & Moderate Temp EFW Pipes | ASTM A672 Gr. B60/B65/B70/C55/C60/C65/C70 |
High Yield ERW/SAW Pipe | API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80 PSL-1/PSL-2 |
High Yield ERW/SAW Pipe | ISO 3183 Gr.L245, L290, L320, L360, L390, L415, L450, L485 |
Carbon Steel Welded and seamless pipe
1/2 to 6 NPS |
Dimensions and weights section modulus and gallons capacity per linear foot |
Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule Pipe # |
Section Modulus | Gallon Capacity Per Linear Foot |
---|---|---|---|---|---|---|---|---|
1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
0.636 | 2..728 | 22.87 | XXHY | 4.8795 | .3085 | |||
4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
Steel Pipes Online Industries is a reputed Supplier of related carbon steel pipe fittings such as buittweld fittings, forged fittings, forged flanges, fasteners and gaskets.
Pipe/ Tube Type | NB Sizes | Sch 5 | Sch 10 | Sch 40 | Sch 80 | Sch 160 |
---|---|---|---|---|---|---|
ASTM A53 Grade B Carbon Steel Seamless Pipe | 1/2 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 3/4 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 1 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 1.25 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 1.5 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 2 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 2.5 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 3 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 3.5 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 4 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 5 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 6 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 8 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 10 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 12 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 14 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 16 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 18 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 20 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 22 |
|||||
ASTM A53 Grade B Carbon Steel Seamless Pipe | 24 |
|
|
Grade |
Chemical Composition (%) Max. |
||||||||
---|---|---|---|---|---|---|---|---|---|
C |
Mn |
P |
S |
Cu |
Ni |
Cr |
Mo |
V |
|
A |
0.25 |
0.95 |
0.05 |
0.045 |
0.4 |
0.4 |
0.4 |
0.15 |
0.08 |
B |
0.3 |
1.2 |
0.05 |
0.045 |
0.4 |
0.4 |
0.4 |
0.15 |
0.08 |
Grade | Mechanical Properties, Min. | |
---|---|---|
Tensile Strength(Mpa) | Yield Strength(Mpa) | |
A | 330 | 205 |
B | 415 | 240 |
Outside Diameter at any point shall not vary from standard specified more than:
For NPS 1 1/2 and Smaller Sizes | For NPS 2 and Larger Sizes | ||
---|---|---|---|
1/64" | 1/32" under | 1% over | 1%under |
Seamless and Electric-Resistance-Welded — Bending, flattening, tensile on one length of pipe from each lot of 500 lengths or less of a size.
Continuous-Weld – Bending, flattening, tensile
NPS 1 1/2 & smaller | NPS 2 & larger |
---|---|
one / 25 tons | one / 50 tons |
Seamless and Electric-resistance-welded | Continuous-Welded | |||
Grade A | Grade B | |||
Tensile Strength, min., psi | 48,000 | 60,000 | 45,000 | |
Yield Strength, min., psi | 30,000 | 35,000 | 25,000 |
Standard Weight | |
Single Random — 16′ – 22′. 5% may be jointers. If Plain Ends — 5% may be 12′ – 16′. | |
Double Random — Shortest Length 22′, minimum average for order 35′. | |
Extra Strong and Double Extra Strong | |
Single Random — 12′ -22′. 5% may be 6′ – 12′. | |
Double Random (XS and lighter) — Shortest Length 22′, minimum average for order 35′. | |
Lengths longer than single random with wall thicknesses heavier than XS subject to negotiation. |
Couplings — Applied handling tight. Couplings, 2′ and smaller straight tapped, other sizes taper tapped. | |
Thread Protection — Applied to pipe 4′ and larger. | |
End Finish (unless otherwise specified) — | |
STD or XS, or wall thicknesses less than 0.500 in. (excluding XXS): Plain and beveled | |
All XXS and wall thicknesses over 0.500 in.: Plain end square cut. |
Nominal wall thickness for ASTM A53 Grade B Carbon Steel Seamless Pipe/ ASTM A53 seamless and welded steel pipes according ANSI B36.10:
NPS (in) |
Outside Diameter (in) |
ASTM A53 Grade B Carbon Steel Seamless Pipe Schedule | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SCH 10 | SCH 20 | SCH 30 | SCH STD | SCH 40 | SCH 60 | SCH XS | SCH 80 | SCH 100 | SCH 120 | SCH 140 | SCH 160 | SCH XXS | ||
Wall Thickness (in) | ||||||||||||||
1/8 | 0.405 | 0.068 | 0.068 | 0.095 | 0.095 | |||||||||
1/4 | 0.540 | 0.088 | 0.088 | 0.119 | 0.119 | |||||||||
3/8 | 0.675 | 0.091 | 0.091 | 0.126 | 0.126 | |||||||||
1/2 | 0.840 | 0.109 | 0.109 | 0.147 | 0.147 | 0.187 | 0.294 | |||||||
3/4 | 1.050 | 0.113 | 0.113 | 0.154 | 0.154 | 0.219 | 0.308 | |||||||
1 | 1.315 | 0.133 | 0.133 | 0.179 | 0.179 | 0.250 | 0.358 | |||||||
1 1/4 | 1.660 | 0.140 | 0.140 | 0.191 | 0.191 | 0.250 | 0.382 | |||||||
1 1/2 | 1.900 | 0.145 | 0.145 | 0.200 | 0.200 | 0.281 | 0.400 | |||||||
2 | 2.375 | 0.154 | 0.154 | 0.218 | 0.218 | 0.344 | 0.436 | |||||||
2 1/2 | 2.875 | 0.203 | 0.203 | 0.276 | 0.276 | 0.375 | 0.552 | |||||||
3 | 3.500 | 0.216 | 0.216 | 0.300 | 0.300 | 0.438 | 0.600 | |||||||
3 1/2 | 4.000 | 0.226 | 0.226 | 0.318 | 0.318 | |||||||||
4 | 4.500 | 0.237 | 0.237 | 0.337 | 0.337 | 0.438 | 0.531 | 0.674 | ||||||
5 | 5.563 | 0.258 | 0.258 | 0.375 | 0.375 | 0.500 | 0.625 | 0.750 | ||||||
6 | 6.625 | 0.280 | 0.280 | 0.432 | 0.432 | 0.562 | 0.719 | 0.864 | ||||||
8 | 8.625 | 0.250 | 0.277 | 0.322 | 0.322 | 0.406 | 0.500 | 0.500 | 0.594 | 0.719 | 0.812 | 0.906 | 0.875 | |
10 | 10.750 | 0.250 | 0.307 | 0.365 | 0.365 | 0.500 | 0.500 | 0.594 | 0.719 | 0.844 | 1.000 | 1.125 | 1.000 | |
12 | 12.750 | 0.250 | 0.330 | 0.375 | 0.406 | 0.562 | 0.500 | 0.688 | 0.844 | 1.000 | 1.125 | 1.312 | 1.000 | |
14 | 14.000 | 0.250 | 0.312 | 0.375 | 0.375 | 0.438 | 0.594 | 0.500 | 0.750 | 0.938 | 1.094 | 1.250 | 1.406 | |
16 | 16.000 | 0.250 | 0.312 | 0.375 | 0.375 | 0.500 | 0.656 | 0.500 | 0.844 | 1.031 | 1.219 | 1.438 | 1.594 | |
18 | 18.000 | 0.250 | 0.312 | 0.438 | 0.375 | 0.562 | 0.750 | 0.500 | 0.938 | 1.156 | 1.375 | 1.562 | 1.781 | |
20 | 20.000 | 0.250 | 0.375 | 0.500 | 0.375 | 0.594 | 0.812 | 0.500 | 1.031 | 1.281 | 1.500 | 1.750 | 1.969 | |
22 | 22.000 | 0.250 | 0.375 | 0.500 | 0.375 | 0.875 | 0.500 | 1.125 | 1.375 | 1.625 | 1.875 | 2.125 | ||
24 | 24.000 | 0.250 | 0.375 | 0.562 | 0.375 | 0.688 | 0.969 | 0.500 | 1.219 | 1.531 | 1.812 | 2.062 | 2.344 | |
30 | 30.000 | 0.312 | 0.500 | 0.625 | 0.375 | 0.500 | ||||||||
32 | 32.000 | 0.312 | 0.500 | 0.625 | 0.375 | 0.688 | ||||||||
34 | 34.000 | 0.312 | 0.500 | 0.625 | 0.375 | 0.688 | ||||||||
36 | 36.000 | 0.312 | 0.500 | 0.625 | 0.375 | 0.750 | ||||||||
42 | 42.000 | 0.500 | 0.625 | 0.375 | 0.750 |
Maximum working pressure for carbon steel pipes manufactured according ASME/ANSI B 36.10 and ASTM A53 B:
Carbon Steel Pipes – Working Pressure | |||||||
---|---|---|---|---|---|---|---|
Nominal Size (inches) |
Pipe Outside Diameter OD (inches) |
Schedule Number or weight | Wall Thickness – t – (inches) |
Inside Diameter – d – (inches) |
Working Pressure ASTM A53 B to 400°F | ||
Manu- facturing Process |
Joint Type | psig | |||||
1/4 |
0.540 |
40ST |
0.088 |
0.364 |
CW1) |
T |
188 |
80XS |
0.119 |
0.302 |
CW |
T |
871 |
||
3/8 |
0.675 |
40ST |
0.091 |
0.493 |
CW |
T |
203 |
80XS |
0.126 |
0.423 |
CW |
T |
820 |
||
1/2 |
0.840 |
40ST |
0.109 |
0.622 |
CW |
T |
214 |
80XS |
0.147 |
0.546 |
CW |
T |
753 |
||
3/4 |
1.050 |
40ST |
0.113 |
0.824 |
CW |
T |
217 |
80XS |
0.154 |
0.742 |
CW |
T |
681 |
||
1 |
1.315 |
40ST |
0.133 |
1.049 |
CW |
T |
226 |
80XS |
0.179 |
0.957 |
CW |
T |
642 |
||
1 1/4 |
1.660 |
40ST |
0.140 |
1.380 |
CW |
T |
229 |
80XS |
0.191 |
1.278 |
CW |
T |
594 |
||
1 1/2 |
1.900 |
40ST |
0.145 |
1.610 |
CW |
T |
231 |
80XS |
0.200 |
1.500 |
CW |
T |
576 |
||
2 |
2.375 |
40ST |
0.154 |
2.067 |
CW |
T |
230 |
80XS |
0.218 |
1.939 |
CW |
T |
551 |
||
2 1/2 |
2.875 |
40ST |
0.203 |
2.469 |
CW |
W |
533 |
80XS |
0.276 |
2.323 |
CW |
W |
835 |
||
3 |
3.500 |
40ST |
0.216 |
3.068 |
CW |
W |
482 |
80XS |
0.300 |
2.900 |
CW |
W |
767 |
||
4 |
4.500 |
40ST |
0.237 |
4.026 |
CW |
W |
430 |
80XS |
0.337 |
3.826 |
CW |
W |
695 |
||
6 |
6.625 |
40ST |
0.280 |
6.065 |
ERW2) |
W |
696 |
80XS |
0.432 |
5.761 |
ERW |
W |
1209 |
||
8 |
8.625 |
30 |
0.277 |
8.071 |
ERW |
W |
526 |
40ST |
0.322 |
7.981 |
ERW |
W |
643 |
||
80XS |
0.500 |
7.625 |
ERW |
W |
1106 |
||
10 |
10.75 |
30 |
0.307 |
10.136 |
ERW |
W |
485 |
40ST |
0.365 |
10.020 |
ERW |
W |
606 |
||
XS |
0.500 |
9.750 |
ERW |
W |
887 |
||
80 |
0.593 |
9.564 |
ERW |
W |
1081 |
||
12 |
12.75 |
30 |
0.330 |
12.090 |
ERW |
W |
449 |
ST |
0.375 |
12.000 |
ERW |
W |
528 |
||
40 |
0.406 |
11.938 |
ERW |
W |
583 |
||
XS |
0.500 |
11.750 |
ERW |
W |
748 |
||
80 |
0.687 |
11.376 |
ERW |
W |
1076 |
||
14 |
14.00 |
30ST |
0.375 |
13.250 |
ERW |
W |
481 |
40 |
0.437 |
13.126 |
ERW |
W |
580 |
||
XS |
0.500 |
13.000 |
ERW |
W |
681 |
||
80 |
0.750 |
12.500 |
ERW |
W |
1081 |
||
16 |
16.00 |
30ST |
0.375 |
15.250 |
ERW |
W |
421 |
40XS |
0.500 |
15.000 |
ERW |
W |
596 |
||
18 |
18.00 |
ST |
0.375 |
17.250 |
ERW |
W |
374 |
30 |
0.437 |
17.126 |
ERW |
W |
451 |
||
XS |
0.500 |
17.000 |
ERW |
W |
530 |
||
40 |
0.562 |
16.876 |
ERW |
W |
607 |
||
20 |
20.00 |
20ST |
0.375 |
19.250 |
ERW |
W |
337 |
30XS |
0.500 |
19.000 |
ERW |
W |
477 |
||
40 |
0.593 |
18.814 |
ERW |
W |
581 |
1) CW – continuous weld – a method of producing small diameter pipe (1/2-4")
2) ERW – electric resistance weld – most common form of manufacture for pipe in sizes from 2 3/8-22" OD
|
|
|
ASTM A53 grade b Seamless Pipes, ASTM A53 grade b Welded Tubes, ASTM A53 grade b Pipe in Seamless & Welded both are loose or in bundles tightened with Iron Strips. Special packings: Metal or Wooden Cases, Pallets etc. Plastic closes both ends, Hexagonal bundles maximum 2.000 kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and IN in sackcloth with several steel strips, Plastic caps.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. We can also offer customized packaging for ASTM A53 grade b Seamless Pipes, ASTM A53 grade b Welded Tubes, ASTM A53 grade b Pipe as per customer's requirement.
Marking Requirements
Rolled, die stamped, or paint stenciled (manufacturer’s option).
Overseas Packaging
Export packaging is geared towards the protection, handling and transport of ASTM A53 grade b Seamless Pipes, ASTM A53 grade b Welded Tubes, ASTM A53 grade b Pipe by air or sea freight and, as such, shares many characteristics with export and transport packaging. Utmost care must also be taken to make overseas packaging suitable for long periods of storage. It is important for overseas packaging to be designed with ease of handling in mind, so as to ensure ASTM A53 grade b Seamless Pipes, ASTM A53 grade b Welded Tubes, ASTM A53 grade b Pipe is treated with the utmost care at all times.
Authorised Dealer & distributor of |
||||
---|---|---|---|---|
United Seamless Limited -usl ASTM A53 grade b Pipe |
Bao Steel- Bao ASTM A53 grade b Pipe |
Yangzhou Lontrin Steel Tube -lontrin ASTM A53 grade b Pipe |
Sumitomo Metals Smtm ASTM A53 grade b Pipe |
Tenaris -tnrs ASTM A53 grade b Pipe |
Valourec & Mannesman -v&m ASTM A53 grade b Pipe |
Wuxi ASTM A53 grade b Pipe |
Maharastra Seamless Limited -msl ASTM A53 grade b Pipe |
Indian Seamless Metal Tubes Limited _ismt ASTM A53 grade b Pipe |
Jindal Saw Ltd -jsl ASTM A53 grade b Pipe |
Vendor & Suppliers of |
|||||
---|---|---|---|---|---|
GASCO |
KNPC |
SAUDI ARAMCO |
SABIC |
ORPIC |
PIDMCO |
Mumbai |
Thane |
Navi Mumbai |
Pune |
Pimpri-Chinchwad |
Vadodara |
Kolkata |
Gurgaon |
Ahmedabad |
New Delhi |
Bengaluru |
Chennai |
Surat |
Bhopal |
Ulsan |
Faridabad |
Houston |
Dubai |
Seoul |
Hyderabad |
Singapore |
Abu Dhabi |
Tehran |
Calgary |
Noida |
Riyadh |
London |
Coimbatore |
Jakarta |
Istanbul |
Bangkok |
Kuwait City |
Sharjah |
Muscat |
Edmonton |
Edmonton |
Busan |
Mexico City |
Doha |
Jeddah |
Aberdeen |
Cairo |
Geoje-si |
Perth |
Santiago |
Chandigarh |
Indore |
Kuala Lumpur |
Rio de Janeiro |
Dammam |
Melbourne |
Madrid |
La Victoria |
Bogota |
Lahore |
Los Angeles |
Algiers |
Chiyoda |
Ankara |
Ho Chi Minh City |
Toronto |
Hong Kong |
Rajkot |
Brisbane |
Petaling Jaya |
Ernakulam |
Secunderabad |
Gimhae-si |
Al Jubail |
Port-of-Spain |
Thiruvananthapuram |
Milan |
Atyrau |
Lagos |
Hanoi |
Howrah |
Sydney |
Ahvaz |
Karachi |
New York |
Caracas |
Vung Tau |
Al Khobar |
Manama |
Montreal |
Granada |
Courbevoie |
Visakhapatnam |
Ludhiana |
Moscow |
Dallas |
Haryana |
Colombo |
India |
Saudi Arabia |
Bangladesh |
United States |
UAE |
Canada |
Angola |
Argentina |
Austria |
Azerbaijan |
Pakistan |
Peru |
Chile |
Spain |
France |
United Kingdom |
Indonesia |
Israel |
Iran |
Kuwait |
Mexico |
Malaysia |
Nigeria |
Serbia |
Singapore |
Taiwan |
Chile |
Venezuela |
Ecuador |
Netherlands |
Brazil |
Colombia |
Ghana |
Iran |
Denmark |
Poland |
Australia |
Afghanistan |
Bahrain |
Costa Rica |
Egypt |
Iraq |
Jordan |
South Korea |
Kazakhstan |
Sri Lanka |
Lithuania |
Norway |
Oman |
Philippines |
Poland |
Qatar |
Russia |
Vietnam |
South Africa |
Nigeria |
Mexico |
Turkey |
Hungary |
Algeria |
Belarus |
Belgium |
Bhutan |
Bolivia |
Bulgaria |
Croatia |
Czech Republic |
Estonia |
Finland |
Greece |
Italy |
Japan |
Libya |
Romania |
Thailand |
Trinidad |
Tobago |
Tunisia |
Ukraine |
Yemen |
Hong Kong |
Gabon |
China |
Portugal |
Switzerland |
New Zealand |
Sweden |
Slovakia |
Kenya |
Lebanon |
Morocco |
Mongolia |